Siemens Commissioning PC Stations C79000-G8976-C156-07 - Manual (Page 152)

11 Example — PROFINET Communication with OPC
152
Commissioning PC Stations - Manual and Quick Start
Release 5/2005
C79000-G8976-C156-07
Activity
3. Select the device parameter assignment “CP1613 (RFC1006)” as the PROFInet module and
confirm the dialog:
Confirm with “OK”.
4. The last dialog box of the Commissioning Wizard appears. Click the “Finish” button to complete
your work with the wizard.
Note
It is only necessary to make settings in advanced symbols, if the “S7_extended”
attribute was set during project engineering of the PROFInet data blocks. In this
case, extended S7 functionality is used alongside PROFInet. If this functionality is
not used, the setting in advanced symbols is irrelevant.