Siemens Commissioning PC Stations C79000-G8976-C156-07 - Manual (Page 65)

5 Project Engineering for the OPC Server
65
Commissioning PC Stations - Manual and Quick Start
Release 5/2005
C79000-G8976-C156-07
5.5 Configuring OPC Properties for SNMP in Project
Engineering
5.5.1 Significance in SIMATIC NET
You configure the OPC server an SNMP client in the “SNMP” tab by specifying the
protocol properties for SNMP for the transfer and a node list for the SNMP queries.
Note
For more detailed information on the use of SNMP over the OPC Server, refer to
the documentation for OPC /1/ or the Quick Start in Chapter 10.
You will also find valuable information on the Internet at:
http://www.siemens.com/snmp-opc-server