Siemens Commissioning PC Stations C79000-G8976-C156-07 - Manual (Page 180)

13 SIMATIC NCM PC Project Engineering Tool
180
Commissioning PC Stations - Manual and Quick Start
Release 5/2005
C79000-G8976-C156-07
Follow the steps outlined below:
4. Click on the ”Connect” button and confirm with OK.
This creates a link between the DP slave now connected to the master system and the PC
station previously created in the engineering.
In the next section, the submodules of the DP slave will be configured with the
inputs and outputs.