SMC Networks BARRICADE SMC7901WBRA2 B1 - Manual (Page 106)

C HAPTER 9 | Administration Settings
Password Setup
– 106 –
P ASSWORD S ETUP
Management access to the ADSL Router is controlled through different
levels of user name and password. You can also gain additional access
security by using control filters such as ACLs and URL filters.
To protect access to the management interface, you need to configure a
new Administrator’s password as soon as possible. If a new password is not
configured, then anyone having access to the ADSL Router may be able to
compromise the unit's security by entering the default values.
Management access to the ADSL Router through the WAN port is possible
when remote administration is enabled and the connecting HTTP, port or IP
address is configured.
Figure 61: Password Setup
The following items are displayed on this page:
◆ User Name — Configures the access privileges that the user has.
Select between:
■
Admin: Grants administrator level access, no restrictions.
■
User: Grants user level access, some configuration restrictions.
◆ Old Password — The password for management access. The default
passwords preset for access to the unit is “smcadmin” for admin and
user level. (Length: 3-16 characters, case sensitive)
◆ New Password — Prompts you to enter a new password.
◆ Confirmed Password — Prompts you to enter the password again for
verification.