SMC Networks BARRICADE SMC7901WBRA2 B1 - Manual (Page 84)

C HAPTER 7 | WLAN Configuration
WDS
– 84 –
The following items are displayed on this page:
N OTE :
The Mode of the radio, under Basic Settings, must be set to
AP+WDS before enabling WDS.
◆ Enable WDS — Enables WDS bridging on the radio interface.
A DD WDS AP
Allows the user to enter up to six MAC addresses for WDS bridging.
◆ Apply Changes — Adds the specified MAC address to the Current WDS
AP List.
◆ MAC Address — Specifies a MAC address in the format xxxxxxxxxxxx.
◆ Comment — Specifies a comment to help identify the MAC address.
◆ Add — Adds the user entered MAC address and Comment information
to the table.
◆ Reset — Clears the fields.
C URRENT WDS AP L IST
Displays the current entries in the WDS AP List.
◆ MAC Address — Displays a MAC address entry.
◆ Comment — Displays a useful comment that may help to identify the
MAC address.
◆ Select — Selects a MAC address entry.
◆ Delete Selected — Deletes the selected MAC address entry.
◆ Delete All — Deletes all entries from the table.