SMC Networks BARRICADE SMC7901WBRA2 B1 - Manual (Page 80)

C HAPTER 7 | WLAN Configuration
Wireless Security Setup
– 80 –
RADIUS S ERVER
◆ Port — Specifies the port number used to communicate with the
RADIUS server.
◆ IP Address — Specifies the IP address used to communicate with the
RADIUS server.
◆ Password — Specifies the key necessary for RADIUS server
authentication.
WEP K EY S ETUP
The following page describes the WEP key setup.
Figure 42: Wireless Security Setup - WEP Key Setup
The following items are displayed on this page:
◆ SSID Type — Selects the VAP to configure the WEP security settings
to.
◆ Authentication Type — Selects the authentication type to use.
Options are:
■
Open System: If you don’t set up any other security mechanism
on the access point, the network has no protection and is open to all
users. This is the default setting.
■
Shared Key: Sets the access point to use WEP shared keys. If this
option is selected, you must configure at least one key on the
access point and all clients.