SMC Networks BARRICADE SMC7901WBRA2 B1 - Manual (Page 31)

C HAPTER 2 | Installing the ADSL Router
Mounting on a Wall
– 31 –
M OUNTING ON A W ALL
To mount on a wall, follow the instructions below.
Figure 6: Wall Mounting
The ADSL Router should be mounted only to a wall or wood surface that is
at least 1/2-inch plywood or its equivalent. To mount the ADSL Router on a
wall, always use its wall-mounting slots.
1. Mark the position of the two screw holes on the wall. For concrete or
brick walls, you will need to drill holes and insert wall plugs for the
screws.
2. Insert the included screws into the holes, leaving about 2-3 mm
clearance from the wall.
3. Line up the two mounting points on the ADSL Router with the screws in
the wall, then slide the unit down onto the screws until it is in a secured
position.
Mounting Slots