SMC Networks BARRICADE SMC7901WBRA2 B1 - Manual (Page 40)

C HAPTER 3 | Initial Configuration
Wizard
– 40 –
The following items are displayed on this page:
◆ IP Address — Specifies an IP address for management of the ADSL
Router. Valid IP addresses consist of four decimal numbers, 0 to 255,
separated by periods. (Default: 192.168.2.1.)
◆ Subnet Mask — Indicates the local subnet mask. Select the desired
mask from the drop down menu. (Default: 255.255.255.0)
◆ Enable the secondary LAN IP — Enables/disables dual LAN IP
addresses as a fallback measure.
◆ Enable DHCP Server — Enables/disables DHCP on the ADSL Router.
(Default: disabled)
◆ Start IP Address — Specifies the start DHCP IP address. Valid IP
addresses consist of four decimal numbers, 0 to 255, separated by
periods. (Default: 192.168.2.1.)
◆ Terminal IP Address — Specifies the end DHCP IP address.
◆ Lease Time — When DHCP sends configuration information to a client,
the information is sent with a lease time. This is the length of time that
the client can use the IP address it has been assigned. The duration of
the lease time can be changed according to your specific requirement.
S TEP 3 - WLAN
S ETTINGS
The Step 3 page of the Wizard configures wireless settings for the ADSL
Router.
Figure 12: Wizard - Step 3 - WLAN Settings