SMC Networks BARRICADE SMC7901WBRA2 B1 - Manual (Page 41)

C HAPTER 3 | Initial Configuration
Wizard
– 41 –
The following items are displayed on this page:
B ASIC S ETTINGS
◆ Disable Wireless LAN Interface — Enables/disables the wireless
802.11b/g interface.
◆ SSID — Specifies an SSID (service set identifier) which must be the
same as that on all wireless clients that wish to associate with the unit.
◆ Channel Number — Specifies the radio channel number which must
be the same as that on all wireless clients that wish to associate with
the unit. The ADSL Router is set to automatically detect channel
settings of wireless devices. (Default: Auto; Range: 1~11)
S ECURITY S ETTINGS
This section configures security settings to protect from intruders accessing
your network.
◆ Encryption — Specifies the security used to protect your wireless
network. (Default: None)
■
None: Allows any wireless client within range to associate with the
ADSL/Router.
■
WEP: Provides a basic level of security using static shared keys that
are distributed to all clients. Be sure to configure at least one static
key. Alternatively, enable 802.1X authentication to dynamically
create and distribute keys from a RADIUS server.
■
WPA(TKIP): Wi-Fi Protected Access (WPA) using either a static
pre-shared key, or 802.1X authentication through a RADIUS server.
■
WPA2(AES): WPA2 using either a static pre-shared key, or 802.1X
authentication through a RADIUS server.
■
WPA2 Mixed: WPA and WPA2 using either a static pre-shared key,
or 802.1X authentication through a RADIUS server.