SMC Networks BARRICADE SMC7901WBRA2 B1 - Manual (Page 60)

C HAPTER 5 | WAN Configuration
Channel Configuration
– 60 –
C URRENT ATM VC
T ABLE
The Current ATM VC Table is a display only table of the configured
parameters used to communincate with the remote ATM switch.
◆ Select — Selects the configured connection.
◆ Inf — Displays a virtual interface.
◆ Mode — Displays the channel mode employed by the link.
◆ VPI — Displays the virtual path identifyer (VPI) of the link.
◆ VCI — Displays the virtual vircuit identifyer (VCI) of the link.
◆ Encapt — Displays the encapsulation used.
◆ NAPT — Displays the network address port translation (NAPT).
◆ IP Addr — Displays the IP address of the link.
◆ Remote IP — Displays the remote IP address of the link.
◆ Subnet Mask — Displays the subnet mask.
◆ User Name — Displays the user name.
◆ DRoute — Dipslays if a default route (DRoute) has been enabled.
◆ Status — Displays if the link is enabled or disabled.
◆ Actions — Gives the options to edit the link information using the
pencil icon, or delete the link using the trashcan icon.
A CTIONS - E DIT
Clicking the pencil icon in the Current ATM VC Table opens a new window
that allows you to edit some of the parameters of the preconfigured link.
The example shown below displays a bridged interface.
Figure 25: Editing a bridged entry in the Current ATM VC Table