SMC Networks BARRICADE SMC7901WBRA2 B1 - Manual (Page 90)

C HAPTER 8 | Firewall Configuration
MAC Filtering
– 90 –
MAC F ILTERING
MAC based packet filtering enables the ADSL Router to filter clients based
on their physical layer address.
Figure 48: MAC Filtering Settings
The following items are displayed on this page:
◆ Outgoing Default Action — A default action for MAC addresses not
configured in the filter table. (Default: Allow, maximum 32 entries are
allowed.)
◆ Incoming Default Action — A default action for MAC addresses not
configured in the filter table. (Default: Allow, maximum 32 entries.)
N OTE :
The default outgoing and incoming defaults allow traffic from all MAC
addresses.
◆ Direction — Specifies the packet destination. (Default: Outgoing)
◆ Rule Action — Specifies if traffic should be permitted or denied.
(Options: Deny, Allow; Default: Deny)