SMC Networks BARRICADE SMC7901WBRA2 B1 - Manual (Page 70)

C HAPTER 6 | LAN Configuration
DHCP Settings
– 70 –
◆ Secondary IP Address — Specifies a secondary IP address for
management of the unit.
◆ DHCP Pool — Selects either the primary or secondary IP address to
enable DHCP under.
◆ Ethernet to Wireless Blocking — Enables/disables access to the
Ethernet port by wireless clients.
DHCP S ETTINGS
The ADSL Router includes a Dynamic Host Configuration Protocol (DHCP)
server that can assign temporary IP addresses to any attached host
requesting the service, as well as a DHCP relay serivce that will route the
DHCP service to other subnets than that of the unit.
N O DHCP By selecting none, you can disable DHCP on the ADSL Router.
Figure 33: No DHCP
The following items are displayed on this page:
◆ None — Disables DHCP on the unit.