SMC Networks BARRICADE SMC7901WBRA2 B1 - Manual (Page 28)

C HAPTER 1 | Introduction
Hardware Description
– 28 –
E THERNET P ORT
The ADSL Router has one 100BASE-TX RJ-45 port that can be attached
directly to 10BASE-T/100BASE-TX LAN segments.
This port supports automatic MDI/MDI-X operation, so you can use
straight-through cables for all network connections to PCs, switches, or
hubs.
P OWER C ONNECTOR
AND B UTTON
The ADSL Router has a power button. When the AC power adapter is
attached and connected to a power source, you must depress the power
button to power the unit.
The power adapter automatically adjusts to any voltage between 100~240
volts at 50 or 60 Hz, and supplies 12 volts DC power to the unit. No voltage
range settings are required.
R ESET B UTTON
This button is used to restore the factory default configuration. If you hold
down the button for 5 seconds or more, any configuration changes you
may have made are removed, and the factory default configuration is
restored to the access point.