SMC Networks BARRICADE SMC7901WBRA2 B1 - Manual (Page 93)

C HAPTER 8 | Firewall Configuration
Port Forwarding
– 93 –
◆ Local IP Address — Specifies the IP address on the local network to
allow external access to.
◆ Local Port — Specifies the port range through which traffic is
forwarded.
◆ Remote IP Address — Specifies the source IP address on the WAN to
allow access from. Leaving this parameter blank allows access from all
traffic.
◆ Public Port — Specifies the external port range on the WAN to allow
access from.
◆ Interface — Selects the WAN interface on which the port forwarding
rule is to be applied.
◆ Add — Adds the configured port forwarding parameters to the Current
Port Forwarding Table.
C URRENT P ORT F ORWARDING T ABLE
The Current Port Forwarding Table displays the entries that are allowed to
forward packets through the ADSL Router’s firewall.
◆ Select — Selects an entry in the Current Port Forwarding Table.
◆ Local IP Address — Displays an IP address on the local network to
allow external access to.
◆ Protocol — Displays the protocol used for forwarding of this port.
◆ Local Port — Displays the local port range.
◆ Comment — Displays a useful comment to identify the nature of the
port to be forwarded.
◆ Enable — Displays if the configured port forwarding setup has been
enabled.
◆ Remote Host — Displays the source IP address on the WAN to allow
access from.
◆ Public Port — Displays the external port range on the WAN to allow
access from.
◆ Interface — Displays the WAN interface on which the port forwarding
rule is applied.
◆ Delete Selected — Deletes a selected entry from the Current Port
Forwarding Table.
◆ Delete All — Deletes all entries in the table.