SMC Networks BARRICADE SMC7901WBRA2 B1 - Manual (Page 81)

C HAPTER 7 | WLAN Configuration
WPA Security
– 81 –
■
Auto: Automatically selects the best authentication type to use.
◆ Key Length — Selects between 64 bit and 128 bit keys.
◆ Key Format — Selects the preferred method of entering WEP
encryption keys on the unit:
■
Alphanumeric: Enter keys as 5 alphanumeric characters for 64 bit
keys, 13 alphanumeric characters for 128 bit keys. This is the
default setting.
■
Hexadecimal: Enter keys as 10 hexadecimal digits (0-9 and A-F) for
64 bit keys, or 26 hexadecimal digits for 128 bit keys.
◆ Default Tx Key — Selects the default key used for transmission.
◆ Encryption Key 1~4 — Specifies the user defined WEP keys.
WPA S ECURITY
The following section describes WPA, WPA2 and WPA2-mixed settings.
Figure 43: Wireless Security Setup - WPA/WPA2 Setup
The following items are displayed on this page:
◆ WPA Authentication Mode — Selects between modes of WPA
authentication. Options are:
■
Enterprise: Uses a RADIUS server for authentication. This applies
to enterprise deployment.
■
Personal: Uses a pre-shared key for authentication.