Sharp MX-C401 - Manual (Page 242)

2-6
COPIER
Contents
COPYING SEQUENCE
This section explains the basic procedure for copying. Select settings in the order shown below to ensure that the copy
operation takes place smoothly.
For detailed procedures for selecting the settings, see the explanation of each setting in this chapter.
Place the original.
Place the original in the automatic document feeder tray, or on
the document glass.
* Depending on the copy functions used, there are also cases
where functions are selected before the original is placed.
Basic copy settings
Select the basic copy settings.
The main settings are as follows:
• Color mode
☞
COLOR COPY MODES (page 2-21)
• Exposure and original type
☞
CHANGING THE
EXPOSURE AND ORIGINAL IMAGE TYPE (page 2-23)
• Copy ratio
☞
REDUCTION/ENLARGEMENT/ZOOM
(page 2-25)
• Original size
☞
ORIGINAL SIZES (page 2-29)
• Paper Settings
☞
PAPER TRAYS (page 2-9)
2-sided copy settings
Select settings as needed for 2-sided copying and 2-sided
scanning of the original.
☞
AUTOMATIC 2-SIDED COPYING (page 2-15)
8½x11
8½x11
5½x8½
Auto
8½x11
Plain
8½x14
8½x11
Color Mode Special Modes
Plain
2-Sided Copy
Output
File
Quick File
Copy Ratio
100%
3.
2.
1.
Original Paper Select
Full Color
Exposure
Auto
4.
OK 2-Sided Copy