Sharp MX-C401 - Manual (Page 593)

5-55
SCANNER/INTERNET FAX
Contents
Specifying the send size of the image
Specify the send size as a paper size. If a send size bigger than the scan size is selected, the image will be enlarged. If
a send size smaller than the scan size is selected, the image will be reduced.
• The send size cannot be specified when [Long Size] is selected for the scan size, or when the scan size is specified by
numerical values.
• The send size cannot be specified when [TIFF-S] is selected for the format in Internet fax mode. (The send size is fixed at
8-1/2" x 11" (A4 in landscape orientation).)
1
Select the mode and display the image settings screen.
(1) Touch the tab of the mode that you wish to use.
(2) Touch the [Original] key.
☞
IMAGE SETTINGS (page 5-49)
2
Touch the [Send Size] key.
3
Specify the send size.
(1) Touch the desired send size key.
(2) Touch the [OK] key.
• Depending on the paper size specified for the "Scan Size", it may not be possible to select some sizes for the "Send
Size". Size keys that cannot be specified for the "Send Size" are grayed out to prevent selection.
• To specify an AB size for the send size, touch the [AB Inch] key to highlight the [AB] side and then specify the
send size.
8½x11
Scan/Original OK
Auto
Scan Size
2-Sided
Tablet 2-Sided
Booklet
Send Size 100%
Image Orientation
Auto
Scan/Original
Manual
OK
Inch
AB 5½x8½
8½x11 8½x14
8½x13
8½x13
11x17
(2) (1)