Sharp MX-C401 - Manual (Page 244)

2-8
COPIER
Contents
ORIGINALS
STANDARD ORIGINAL PLACEMENT ORIENTATIONS
Place the original so that the top and bottom edges are oriented as shown below. For more information on placing the
original, see "
ORIGINALS " (page 1-34 ) in "1. BEFORE USING THE MACHINE".
• When one or more special modes are selected, the key appears in the base screen. Touch the key to display a
list of the selected special modes. This lets you check what special modes are selected and the settings of each mode.
☞
Checking what special modes are selected (page 2-5)
• To store a copy job using the document filing function, select copy settings and then touch the [File] key or the [Quick File]
key.
To cancel all settings, press the [CLEAR ALL] key ( ).
When the [CLEAR ALL] key ( ) is pressed, all settings selected to that point are cleared and you will return to the base
screen.
To stop scanning of the original and copying, press the [STOP] key (
).
When the [STOP] key ( ) is pressed, a message will appear asking you if you want to cancel the job. Touch the [Yes] key
in the message screen.
abc
abc
Document glass Document feeder tray
Place the original
face down in the
left center position
of the document
glass
Portrait original
abc
When using the below functions in copy
mode, place the original so that the top
of the image is to the right.
• Staple sort
• Pamphlet copy
• 2in1
• Stamp
Top of image to
the right
abc abc
Document glass Document feeder tray
Place the original
face down in the
left center position
of the document
glass
Landscape original
abc
When using the staple sort function,
place the original so that the top of the
image is toward you.
Top of image
toward you