Sharp MX-C401 User Manual

Page 454

Advertising
background image

4-36

FACSIMILE

Contents

TRANSMISSION USING THE SPEAKER

When the speaker is used to dial, the fax is sent after the number is dialed and the connection is established. If a person
answers, you will be able to hear his or her voice, but you will not be able to speak.

1

Place the original.

Place the original face up in the document feeder tray, or face
down on the document glass.
When the document glass is used, only one page can be
transmitted.
When the original is a different size than the size setting, set
the original size.

SPECIFYING THE SCAN SIZE AND SEND SIZE

(page

4-45

)

2

Enter the destination fax number.

(1) Touch the [Speaker] key.

You will hear the dial tone through the machine's speaker.

(2) Touch the [Address Book] key in the base

screen.

For the [Address Book] key, see "

BASE SCREEN OF

FAX MODE

" (page 4-8).

(3) Touch the one-touch key of the desired

destination.

A group key cannot be used.

• In addition to specification by one-touch key, a destination can also be specified using a search number. You can

also directly enter a fax number with the numeric keys or look up a destination in a global address book. For more
information, see "

ENTERING DESTINATIONS

" (page 4-16).

• After touching the [Speaker] key, you can touch the [Speaker Volume] key to adjust the volume of the speaker. The

speaker volume changes each time the [Speaker Volume] key is touched. Adjust the volume to the desired level.

3

Wait until the connection is made and then press the [BLACK & WHITE START]
key.

Transmission begins.

To cancel transmission...
Touch the [Speaker] key before the [BLACK & WHITE START] key is pressed. The line will be disconnected and
transmission will stop.

• When the speaker is used, transmission takes place without scanning the original into memory.

• A destination that includes an F-code (sub-address and passcode) cannot be used.

• A one-touch key that has multiple destinations or has a non-fax destination cannot be used.

System Settings (Administrator): Speaker Settings
The default volume level of the speaker can be changed in the "Speaker Settings".

1

2

III III

GGG GGG

EEE EEE

CCC CCC

AAA AAA

JJJ JJJ

HHH HHH

FFF FFF

DDD DDD

BBB BBB

10

5

15

Sort Address

Speaker Volume

To

Cc

Telephone mode.

Fax Manual

Reception

Resend

Speaker

Condition

Settings

ABCD

Freq.

EFGH

IJKL

MNOP

QRSTU

VWXYZ

etc.

Fax Memory:100%

(3)

(1)

Advertising