Sharp MX-C401 - Manual (Page 366)

3-20
PRINTER
Contents
PRINTING ON ENVELOPES
The bypass tray can be used to print on special media such as envelopes. The procedure for printing on an envelope
from the printer driver properties screen is described below.
For the types of paper that can be used in the bypass tray, see "
IMPORTANT POINTS ABOUT PAPER " (page 1-26) in
"BEFORE USING THE MACHINE". For the procedure for loading paper in the bypass tray, see " LOADING PAPER IN
THE BYPASS TRAY " (page 1-31) in "1. BEFORE USING THE MACHINE".
Select the envelope size in the appropriate settings of the application ("Page Settings" in many applications) and then
perform the following steps.
1
Select the paper size.
(1) Select the envelope size from the "Paper
Size" menu on the page setup screen.
In Mac OS 9, select the envelope size from the
"Paper" menu on the page setup screen.
(2) Click the [OK] button.
In the case of media that can only be loaded in a certain orientation such as an envelope, you can rotate the image
180 degrees if needed. For more information, see "
ROTATING THE PRINT IMAGE 180 DEGREES (Rotate 180
degrees) " (page 3-37).
2
Select the bypass tray.
(1) Select [Paper Feed] on the print screen.
In Mac OS 9, select [General].
(2) Select [Bypass Tray(Envelope)] from the
"All pages from" menu.
• In Mac OS 9, select [Bypass Tray(Envelope)] from
the "All pages from" menu of "Paper Source".
• Set the paper type of the bypass tray to [Envelope]
and make sure the envelope is loaded in the bypass
tray.
For more information on "Paper Feed", see " SELECTING THE PAPER " (page 3-19).
It is recommended that you do a test print to check the print result before using an envelope.
(1)
(2)
(1)
(2)