Sharp MX-C401 User Manual
Page 814
8-5
(9) Paper misfeed in tray 1 to tray 4 (in the
tray)
When a paper gets twisted to
the roller, remove the tray
and remove the misfeed
paper.
(10) Paper misfeed in the finisher
Open the front cover.
While pressing the lever over
to the left, slide the finisher to
the left until it stops.
Remove the misfed paper.
Turn roller rotating knob in
the direction of the arrow to
remove the misfed paper.
Make sure that there is no
misfed paper in the machine.
When pulling out a tray, be sure to open the right
cover and check for a paper misfeed. If a tray is pulled
out when there is a misfeed, the paper will tear and a
torn piece may remain in the machine, making it more
difficult to remove the misfed paper. To open the right
cover and check for a misfeed, follow the procedure in
(7) Paper misfeed in tray 1 (side)
.