Sharp MX-C401 - Manual (Page 602)

5-64
SCANNER/INTERNET FAX
Contents
CHANGING THE COLOR MODE
This procedure is used to change the color mode used to scan the original when the [COLOR START] key or the
[BLACK & WHITE START] key is pressed.
This function cannot be used in Internet fax mode.
Start key Mode Scanning method
[COLOR START] key
Auto
The machine detects whether the original is color or black and white and
automatically selects full color or black and white (Mono2 or Grayscale)
scanning.
Full Color
The original is scanned in full color. This mode is best for full color originals
such as catalogues.
[BLACK & WHITE
START] key
Mono2
Colors in the original are scanned as black or white. This mode is best for
text-only originals.
Grayscale
The colors in the original are scanned in black and white as shades of gray
(grayscale).
1
Select the mode and display the color mode settings screen.
(1) Touch the tab of the mode that you wish to use.
(2) Touch the [Color Mode] key.
☞
IMAGE SETTINGS (page 5-49)
2
Select the color mode.
(1) Touch the key of the mode to be used when
the [COLOR START] key is pressed.
You can select whether black & white scanning will take
place in Mono2 or grayscale when [Auto] is selected and
a black and white original is scanned. Note that if the file
format is set to JPEG, scanning will take place in
grayscale.
(2) Touch the key of the mode to be used when
the [BLACK & WHITE START] key is
pressed.
(3) Touch the [OK] key.
• System Settings (Administrator): Default Color Mode Settings
The default color mode can be changed.
• System Settings (Administrator): Disable Change of B/W Setting in Auto Mode
This prohibits selection of the black and white original scanning setting when [Auto] is selected for the color mode.
Scan/Color Mode OK
Mono2
Grayscale
Grayscale
Mono2
Auto
Full Color Color Mode
B/W Mode
(2) (3) (1)