Sharp MX-C401 - Manual (Page 250)

2-14
COPIER
Contents
7
Remove the original and place the next original, and then press the [COLOR
START] key or the [BLACK & WHITE START] key.
Repeat this step until all originals have been scanned.
For the second original and following originals, use the same [START] key as you did for the first original.
8
Touch the [Read-End] key.
To cancel scanning of the original and copying...
Press the [STOP] key (
).
Read-End
Place next original. Press [Start].
When finished, press [Read-End].