Sharp MX-C401 - Manual (Page 7)

4
TO ENSURE SAFE USE OF THE MACHINE
Warnings
• When turning off the power, be sure to press the [POWER] key on the
operation panel, then wait 20 seconds and switch off the main power switch.
In the event that the main power is suddenly interrupted due to a power failure
or other reason, turn the machine power back on and then turn it off in the
correct order.
If the machine is left for a long time with the main power having been turned
off prior to the [POWER] key, abnormal noises, degraded image quality, and
other problems may result.
• Do not touch the transfer belt and the transfer roller. Scratches or smudges on
the transfer belt or the transfer roller will cause dirty prints.
• The fusing unit is extremely hot. Exercise care in
this area.
• Do not look directly at the light source. Doing so
may damage your eyes.
• The machine is heavy. To prevent injury when
moving the machine, it is recommended that it be
moved by four or more persons.
• Do not throw toner, a toner container (toner
cartridge), or a toner collection container into a
fire. Toner may fly and cause burns.
• Store toner, toner containers (toner cartridges),
and toner collection containers out of the reach of
children.
• Do not place the machine on a wobbly, slanted,
or unstable surface. Install the machine only on a
surface that can withstand the weight of the
machine.
• When unplugging the power cord, do not grasp and pull on the cord.
Fusing unit
mxc401_us_saf.book 4 ページ ２００８年１０月１５日 水曜日 午前１１時５２分