Sharp MX-C401 - Manual (Page 43)

40
REPLACING SUPPLIES AND MAINTENANCE
Cleaning the automatic document feeder rollers
If you find that originals fed through the automatic document feeder misfeed or
are soiled by the rollers, remove the rollers and clean them. If misfeeds or
soiling continue to occur, replace the rollers.
Before starting, remove any originals from the automatic document feeder.
1
Press the [POWER] key ( ) on the operation panel
to turn off the panel power, and then switch the
main power switch to the off position.
2
Open the document conveyor cover on the
automatic document feeder.
mxc401_us_saf.book 40 ページ ２００８年１０月１５日 水曜日 午前１１時５２分