Sony DVS-9000 - Manual (Page 156)

Chapter 2
Men
us and Control P
anel
C:\WINNT\Profiles\Administrator\Desktop\WORK_08_21\370467401
DVS9000WW\01GB04C02-WW.fm masterpage:Left
156
Names and Functions of Parts of the Control Panel
DVS-9000/9000SF
3-704-674-01 (1)
M/E 1 and P/P: Select the corresponding
regions, M/E-1 and PGM/PST.
USER 1 and USER 2: Select the
corresponding USER regions.
DME1 to DME4: Select a DME channel.
P-BUS: Select the P-BUS region.
GPI:
c Function selection buttons
UNDO: After recalling a register, press this
button to return to the state before
recalling the register.
STORE STATS (store status): This lights
amber when data is stored in a register.
After saving data to a register, hold
down this button and press the
[UNDO] button to return the register to
the state before the data was saved.
STORE: Press this button to switch to the
mode for saving a snapshot or effect in
a register.
RCALL (recall): Press this button to
switch to the mode for recalling a
snapshot, effect, or shot box from a
register.
d Numeric keypad
In addition to the buttons for numeric input,
this includes buttons for adding attributes to
snapshots.
0 to 9: Used to input numeric digits.
. (period): Enters the decimal point.
When the [TRANS RATE] button is lit,
enters “00.” When the [EFF] button or
[SNAP SHOT] button is lit, this is used
to find an empty register.
+/–/ EFF DISS (effect dissolve): Invert the
sign, negative or positive.
When the [SNAP SHOT] button is lit,
applies the effect dissolve attribute to a
snapshot.
CLR/AUTO TRANS (clear/auto
transition): Clear an input value,
returning to the previous state.
When the [SNAP SHOT] button is lit,
applies the auto transition attribute to a
snapshot.
TRIM/GPI ENBL (enable): After
entering a difference value to be added
to an existing setting, press this button
to confirm the change.
ENTER: Confirm an entered value.
e Display
This shows the selected region name and
entered numeric values.