Sony DVS-9000 - Manual (Page 221)

221
C:\WINNT\Profiles\Administrator\Desktop\WORK_08_21\370467401
DVS9000WW\01GB06C04-WW.fm masterpage:Right
Key Setting Operations Using Menus
Chapter 4
K
e
ys
DVS-9000/9000SF
3-704-674-01 (1)
5
To invert the black/white sense of the mask source, press the [Mask Invert]
button, turning it on.
Specifying the Key Output Destination
Selecting a DME channel which is already in use (override)
To select a DME channel which is already assigned to another keyer or
transition, on the currently selected keyer, use the following procedure.
1
In the M/E-1>Key 1 menu, select HF5 ‘Processed Key.’
The Processed Key menu appears.
2
Press [Override], turning it on.
3
In the <DME Select> group, select the DME channel (DME1 to DME8) to
be used.
The colors with which [DME1] to [DME8] are lit show the key assignment
status.
Lit green: The currently selected key is assigned to the DME.
Lit amber: A different key is assigned to the DME.
Off: No key is assigned to the DME.
In the DVS-9000 system, the [DME5] to [DME8] buttons are disabled.
Using the key processed keyer signals (external processed key)
To use the key processed keyer key fill and key source signals as reentry
signals on the M/E or PGM/PST bank, in the Processed Key menu, press [Ext
Proc Key], turning it on.
This assigns the key fill and key source signals for M/E-1 Key 1 to reentry
signals PROC V and PROC K.
Assigning a DME output signal as a monitor signal
Use the following procedure.
1
In the Processed Key menu, press [Monitor].
The Monitor menu appears.