Wipe copy and wipe swap, Matte data copy and swap – Sony DVS-9000 User Manual

Page 67

Advertising
background image

67

C:\WINNT\Profiles\Administrator\Desktop\WORK_08_21\370467401
DVS9000WW\01GB03C01-WW.fm

masterpage:Right

Copy and Swap

Chapter 1

D

V

S-9000 Functions

DVS-9000/9000SF

3-704-674-01 (1)

Keyer copy and keyer swap

You can carry out copy and swap operations among the keyers listed in the
following table.

Note

If a DME is being used on the source keyer for a copy or either keyer for a
swap, then if for example there are insufficient DME channels, or the limit on
using DME channels within the M/E bank is exceeded, it may not be possible
to select the DME.

Wipe copy and wipe swap

You can copy and swap the wipe settings between the M/E-1 and PGM/PST
banks.

Wipe copy and wipe swap in the independent key transition
control block

You can copy and swap the wipe settings among the keyers listed in the
following table.

Matte data copy and swap

You can copy or swap the matte data among the color generators listed in the
following table.

Target bank

Target keyer

Target data

M/E-1

Keys 1 to 4

Key settings excluding the following data
items:
• Setup data
• Key snapshots
• Key memory

PGM/PST

Downstream keys 1 to 4

Target bank

Target data

M/E-1
PGM/PST

Wipe settings.
It is not, however, possible to carry out copy or swap involving
independent key transition wipe settings.

Target bank

Target keyer

Target data

M/E-1

Keys 1 to 4

Wipe settings in the independent key
transition control block.
It is not, however, possible to copy or
swap wipe settings to or from an external
downstream keyer.

PGM/PST

Downstream keys 1 to 4

Advertising