Sony DVS-9000 - Manual (Page 230)

Chapter 4
K
e
ys
C:\WINNT\Profiles\Administrator\Desktop\WORK_08_21\370467401
DVS9000WW\01GB06C04-WW.fm masterpage:Left
230
Key Setting Operations With the Key Control Block
DVS-9000/9000SF
3-704-674-01 (1)
a) In the “4H mode” and when [Fine Key] (page 214) is on, the setting value range is 0 to 4.
b) When a wipe pattern key or key wipe pattern key is selected as the key type
• Separate edge on
The outline width settings can be made independently for left, right, top, and
bottom sides. The separate edge function is only available when luminance
key, linear key, or chroma key is selected as the key type.
a) In the “4H mode” and when [Fine Key] (page 214) is on, the setting value range is 0 to 4.
When [Outline] is selected with separate edge on, the [MORE] button lights
amber. Pressing the [MORE] button to turn it green then allows you to adjust
the key fill density parameter with a knob.
Setting the embossing parameters
When the [EMBOS] button is lit green, adjust the following parameters.
To adjust the emboss fill color
When emboss is selected, the [MORE] button lights amber, and the number of
parameters that can be set increases. Press the [MORE] button, changing it
from amber to green, to adjust Matte1.
4 Density Outline density 0 to 100
Knob Parameter Adjustment Setting values
1 Top Top edge width 0 to 8 a)
2 Left Left edge width 0 to 8 a)
3 Right Right edge width
0 to 8 a)
4 Bottom Bottom edge width
0 to 8
a)
Knob Parameter Adjustment Setting values
4 Density Outline density 0 to 100
Knob Parameter Adjustment Setting values
Knob Parameter Setting values
1 Width 0 to 4
2 Position 0 to 359
4 Density 0 to 100
Knob Parameter Adjustment Setting values
1 Luminance Luminance 0 to 100
2 Saturation Saturation 0 to 100
3 Hue Hue 0 to 359
4 Density Density 0 to 100