Sony DVS-9000 - Manual (Page 180)

Chapter 3
T
ransitions
C:\WINNT\Profiles\Administrator\Desktop\WORK_08_21\370467401
DVS9000WW\01GB05C03-WW.fm masterpage:Left
180
Key Priority Setting
DVS-9000/9000SF
3-704-674-01 (1)
2
Holding down the [PRIOR SET] button, press the one of the next transition
selection buttons [KEY1] to [KEY4] ([DSK1] to [DSK4] buttons in the
PGM/PST bank) for the key to appear on top.
The selected key now appears on top, on the program monitor.
The priority of keys other than the selected one does not change.
To change the priority of more than one key, repeat the above operation as
required.
Changing the key priority for after the transition
When executing a transition, turning on the next transition selection button
[KEY PRIOR] causes the keys to be rearranged based on the set priority.
To set the key priority for after the transition, use the following procedure.
1
In the transition control block, hold down the [PRIOR SET] button and
press the [KEY PRIOR] button to turn it on.
The [KEY PRIOR] button lights green, and it becomes possible to change
the key priority setting for after the transition.
2
Hold down the [PRIOR SET] button, and press the one of the next
transition selection buttons [KEY1] to [KEY4] ([DSK1] to [DSK4]
buttons in the PGM/PST bank) for the key you want to bring to the front
after the transition.
To set the priority to be the same as before the transition, press the [BKGD]
button.
Note
The [BKGD] button is only effective when in the mode for changing the
key priority for after the transition.
When the next transition selection button [KEY PRIOR] is on, the selected
key appears on top on the preview monitor. The priority of keys other than
the selected one does not change.
Key 1 selected.
Key priority: 3, 1, 4, 2 Key priority: 1, 3, 4, 2