Sony DVS-9000 - Manual (Page 241)

241
C:\WINNT\Profiles\Administrator\Desktop\WORK_08_21\370467401
DVS9000WW\01GB07C05-WW.fm masterpage:Right
Basic Procedure for Wipe Settings
Chapter 5
Wipes
DVS-9000/9000SF
3-704-674-01 (1)
3
In the M/E-1>Wipe menu, select HF2 ‘Pattern Mix.’
The Pattern Mix menu appears.
4
In the <Pattern Mix> group, select the type of pattern mix.
Mix: mix
+Nam: positive Nam
–Nam: negative Nam
Morphing: morphing
For an overview of types of pattern mix, see page 47.
5
Depending on the selection in step 4 , set the following parameters.
• When mix, positive Nam, or negative Nam is selected
• When morphing (see page 47) is selected
6
In the <Main/Sub Link> group, make the main/sub modifier link function
settings. (See “Main and sub modifier link function” (page 49).)
Full: full link mode
Semi: semi-link mode
Applying the effect of a diamond dust wipe to the selected
pattern (Dust mix)
Use the following procedure.
1
In the Pattern Mix menu, press [Dust Mix], turning it on.
2
Set the following parameters as required.
Knob Parameter Adjustment Setting values
1 Mix Ratio Proportion of sub pattern to the
main pattern 0.00 to 100.00
Knob Parameter Adjustment Setting values
2 Start Point in transition at which main
pattern is at 100%
−
50.00 to
+
150.00
3 End Point in transition at which sub
pattern is at 100%
−
50.00 to
+
150.00
Knob Parameter Adjustment Setting values
1 Mix Ratio Proportion of diamond dust
pattern in mix 0.00 to 100.00
2 H Size Particle width 0.00 to 100.00