Sony DVS-9000 - Manual (Page 190)

Chapter 3
T
ransitions
C:\WINNT\Profiles\Administrator\Desktop\WORK_08_21\370467401
DVS9000WW\01GB05C03-WW.fm masterpage:Left
190
Executing a Transition
DVS-9000/9000SF
3-704-674-01 (1)
Transition control block
Setting the pattern limit with the fader lever
Use the following procedure.
1
Move the fader lever to the position corresponding to a particular pattern
size.
• First make sure that the [PTN LIMIT] button is off.
• To check the pattern size on the preview monitor, first press the [TRANS
PVW] button, to select the transition preview mode (see page 196).
2
Press the [LIMIT SET] button.
This sets the current fader lever position as the pattern limit.
Setting the pattern limit by a menu operation
Use the following procedure.
1
When a wipe is selected as the transition type, in the M/E or PGM/PST
menu, select first VF5 ‘Wipe,’ then HF4 ‘Edge/Direction.’
When a DME wipe is selected as the transition type, in the M/E or PGM/
PST menu, select first VF6 ‘DME Wipe,’ then HF4 ‘Edge/Direction.’
The Edge/Direction menu appears.
BKBD KEY1 KEY2 KEY3 KEY4
KEY
PRIOR MIX
ALL
PST
COLOR
MIX
NAM
WIPE
SUPER
MIX
DME
PRIOR
SET NORM NORM
/REV REV TRANS
PVW
PTN
LIMIT
LIMIT
SET KF
AUTO
TRANS CUT
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
PTN LIMIT button
LIMIT SET button
TRANS PVW button