Answering machine, Setting the number of rings, Setting the voice quality – Siemens 70isdn User Manual
Page 102
Answering machine
90
kap12.fm5
Profiset 70isdn, GB: A30853-X300-B501-3-7619
20.5.99
Setting the number of rings
You can set the number of times the telephone should
ring before the call is answered by the answering ma-
chine.
Setting the voice quality
You can switch between two different voice qualities
when recording an announcement:
●
Normal voice quality (compressed)
●
High voice quality (uncompressed – higher memory
requirement).
<>
and
?
Select MSN number.
<>
and
?
Select the required time controls:
5 = time control 1, 6 = time control 2.
You can see whether the time control is active or not on
the upper display line.
?
"switch over?" appears on the display. Confirm this dis-
play. If the time control was previously deactivated, it is
now activated. If is was activated, it is now deactivated.
Activate the answering machine menu.
<>
o
and
?
With password protection (➔ page 16): enter the pass-
word.
<>
The number of rings set is shown in the upper display
line.
<>
and
?
Select the desired number of rings (1, 2, 4 or 6) or "Auto
2/4". The default setting is 4 rings.
If you select "Auto 2/4", the number of rings depends on
whether new messages are stored. If new messages are
received, the answering machine answers the call after
two rings, otherwise it waits for four rings. This setting is
particularly useful if you are checking your answering ma-
chine remotely as the number of rings indicates whether
there are new messages or not. You thus have the option
of hanging up after two rings without incurring any charg-
es (➔ page 92).
AM menu
5=settings?
?
2=number of calls?
?
Activate the answering machine menu.
AM menu