Siemens 70isdn - Manual (Page 82)

Calls involving two or more parties
70
kap11.fm5 Profiset 70isdn, GB: A30853-X300-B501-3-7619 20.5.99
Switching between two calling parties (toggling)
In the course of a consultation call you can alternate (tog-
gle) between the other two parties. The party who is wait-
ing cannot listen in.
You can program a "Toggle" key if you toggle frequently
(➔ page 42).
Prerequisite: you are conducting a consultation call.
Three-party conference
In a conference, all parties can listen in and talk to each
other.
You must apply to your local network provider for this fea-
ture. Inquire about the respective charges.
In the course of a consultation call you can connect your-
self to the other two parties and set up a three-way con-
ference.
In the course of a normal call you can convene a confer-
ence with a third party.
The "Transfer call" function must be activated in accord-
ance with the configuration in order to transfer calls
(menu: service ➝ configuration ➝ conference).
You can program a "Conference" key if you frequently con-
duct conference calls (➔ page 42).
<>
and ? or Select "Toggle?" and confirm or press the programmed
"Toggle" key.
User 2 is put on hold. The call is switched to user 1.
? or Confirm "Toggle?" or press the programmed "Toggle" key.
User 1 is put on hold. The call is switched to user 2.
Toggle
Toggle
The directory numbers of the parties are only
displayed if they are known. Otherwise, user 1
and/or user 2 is displayed. Directory numbers
are not displayed, for example, in the case of in-
coming calls with number suppression or calls
from analog stations.