Siemens 70isdn - Manual (Page 65)

Outgoing and incoming calls
53
kap08.fm5 Profiset 70isdn, GB: A30853-X300-B501-3-7619 20.5.99
Callback
You must apply to your local network provider for this fea-
ture. Inquire about the respective charges.
If you have activated a callback because the party you
called was busy, you are automatically called back as
soon as the user finishes his/her call.
If you are conducting a call when the callback call is re-
ceived, you will be called back after you have finished this
call.
Your Profiset 70isdn can activate up to five callbacks
which are stored in the callback list. You network provider
may not authorise all five activatable callbacks, however.
In this case, the maximum number of callbacks author-
ised are activated.
Initiating a callback
Prerequisite: you called a user whose line was busy at the
time.
Accepting a callback
Prerequisite: you activated a callback.
Clearing a callback
Prerequisite: you activated a callback.
Checking the callback list
Prerequisite: you activated a callback.
? Confirm "Callback?".
The display shows "Will call back".
The call signal sounds.
? or c Confirm "Accept callback?" or lift the handset.
The desired user is called.
<>
and ?
Select "Clear callback?" and confirm.
The callback is cleared.
<>
and ?
Select "Display call(s)" and confirm.
The first callback entry is displayed.
<>
and ?
Select "next entry?" or "previous entry?" and confirm.
The next (if any) or previous callback entry is displayed.
<> and
?
or h
To exit the callback list, select "End?" and confirm or press
the stop key.
You have exited the callback list.