Forwarding calls, Changing active call forwarding – Siemens 70isdn User Manual
Page 78
Forwarding calls
66
kap10.fm5
Profiset 70isdn, GB: A30853-X300-B501-3-7619
20.5.99
Programming and activating call forwarding for other devices
If other devices that cannot program call forwarding, e.g.
fax or answering machine, are operated on the same S
0
bus, you can program call forwarding for "all services" for
the bus’s call number (MSN).
Prerequisite: the "Forwarding" menu item is activated
(➔ page 26).
Changing active call forwarding
Prerequisite: call forwarding is active.
Prerequisite: The "Forwarding" menu item is activated
(➔ page 26).
You cannot change an MSN if forwarding is ac-
tive for it (see ➔ page 18).
Details about programmed forwarding can be
queried at any time by selecting the entry "Sta-
tus" in the service menu.
<>
and
?
Select "Forwarding?" and confirm.
<>
and
?
Select "4=others?" and confirm.
The directory number for "others?" is preset with the last
number.
The number can be deleted by backspacing with
<
and
edited with
o
.
?
Confirm.
<>
and
?
Select the forwarding mode "immediately", "deferred" or
"if busy" and confirm.
The last call forwarding number is prompted.
The number can be deleted by backspacing with
<
and
edited with
o
.
?
Confirm.
Call forwarding is active for all calls under MSN 4.
The call number "4=other?" must differ from the
call numbers used for MSN1 to MSN3 that you
set in Profiset 70isdn (➔ page 18).
?
Confirm "Forwarding?".
<>
and
?
Select the number for which forwarding is to be changed
(=on). Forwarding is active for this number.
<>
and
?
Select "Destination new/change?" and confirm.