Outgoing and incoming calls, Number redial (automatic dialing) – Siemens 70isdn User Manual
Page 59
Outgoing and incoming calls
47
kap08.fm5
Profiset 70isdn, GB: A30853-X300-B501-3-7619
20.5.99
Dialing directory numbers from the telephone directory (automatic
dialing)
If you stored a user in the your Profiset 70isdn’s electronic
telephone directory, you can dial this user by entering his/
her name.
Number redial (automatic dialing)
The last ten numbers dialed are stored automatically. If a
user you wish to contact is busy or unreachable, you can
initiate number redial the next time you attempt to call,
without having to dial the directory number again.
The numbers are sorted in ascending order according to
date and time. The last number dialed is thus at the top of
the list.
Press the "Telephone directory" key; LED lights up.
<>
and
?
Select the desired telephone directory division "Gener-
al?", "Private?" or "All?" and confirm.
o
or
<>
and
?
Enter the name of the user using the digit keys. The digit
keys only have to be pressed once (for the name "Smith",
for example, 1 x
7
for "S", than 1 x
6
for "M", etc.).
Or select the user with the scroll keys.
Confirm the selected entry
?
Confirm "Dial?".
c or
Lift the handset or press the "Loudspeaker" key to talk
handsfree.
The directory number is dialed.
Telephone directory
>
1=select entry?
?
Loudspeaker
If you select a name with the digit keys, similar
entries, if any, are displayed in the lower right-
hand corner. The display "+1>" means, for exam-
ple, that a similar name exists. You can scroll to
similar names with
<>
.
Press the "Number redial" key; LED lights up.
The last directory number dialed is displayed.
<>
and
?
Select the desired directory number and confirm; LED
goes out when the call has been successfully set up.
The directory number can be deleted using the back-
space key
<
and re-entered with
o
.
?
Confirm "Dial?".
The directory number is dialed.
Number redial