Programming telephone settings, International access code, Area code – Siemens 70isdn User Manual
Page 45
Programming telephone settings
33
kap05.fm5
Profiset 70isdn, GB: A30853-X300-B501-3-7619
20.5.99
International access code
The international access code (code for connections
abroad) is required for the comparison of the recorded di-
rectory numbers received via CLIP/COLP. For an explana-
tion of the abbreviations CLIP and COLP, see the ISDN
glossary (➔ page 94).
The factory default is 00.
You can only change this value if the network operator has
a new or a different access code.
Area code
The area code (code for connections within the same local
network) is required for the comparison of the recorded
directory numbers received via CLIP/COLP. For an expla-
nation of the abbreviations CLIP and COLP, see the ISDN
glossary (➔ page 94).
You can set the local access code for your ISDN connec-
tion yourself.
>
Service?
? >
2=configuration?
?
o
and
?
With password protection (➔ page 16): enter the pass-
word.
o
Enter the international access code (max. 4 digits). Back-
space to delete with
<
.
?
Save the setting.
>
17=int. access code?
?
>
Service?
? >
2=configuration?
?
o
and
?
With password protection (➔ page 16): enter the pass-
word.
o
Enter your own area code (e.g. 089 for Munich) (max. 6
digits). Backspace to delete with
<
.
?
Save the setting.
>
18=area code?
?