Siemens 70isdn - Manual (Page 60)

Outgoing and incoming calls
48
kap08.fm5 Profiset 70isdn, GB: A30853-X300-B501-3-7619 20.5.99
Accepting a call
The Profiset 70isdn rings with a particular call signal
(➔ page 21). If the caller is an ISDN user, his/her directory
number is shown in the display. The name of the caller is
displayed if it is stored in the Profiset 70isdn telephone di-
rectory.
You can conduct the call via the handset or you can acti-
vate the handsfree function (➔ page 55).
Alternatively, you can reject the call.
Forwarding a call (Call Deflection)
You can forward incoming calls manually (by pressing a
key) to another directory number immediately.
You must apply to your local network provider for this fea-
ture. Inquire about the respective charges.
g
or c and g
When the called party answers, you can talk handsfree
(➔ page 55)
or lift the handset and speak.
Call signal sounds.
The directory number and name of the caller are dis-
played, if possible.
c or
?
or
Lift the handset, confirm "Accept call?", or press the
"Loudspeaker" key to talk handsfree; LED lights up.
You are connected to the calling party. Loudspeaker
> Service? ? > 2=configuration? ?
o and ? With password protection (➔ page 16): enter the pass-
word.
The upper display line indicates whether call forwarding
is activated or deactivated.
<> Select "switch over?".
? Save the setting. If call forwarding was previously deacti-
vated, it is now activated. If it was activated, it is now de-
activated.
> 09=forward call? ?