Siemens 70isdn - Manual (Page 61)

Outgoing and incoming calls
49
kap08.fm5 Profiset 70isdn, GB: A30853-X300-B501-3-7619 20.5.99
Forwarding a call
Rejecting a call
Rejecting all calls (do not disturb)
You can temporarily reject calls to your Profiset 70isdn
while you nonetheless continue to make calls. In this
case, you must have programmed a key with the "Do not
disturb" function (➔ page 42). The setting is active for as
long as the associated LED is lit.
Call waiting
You must apply to your local network provider for the "Call
waiting" feature. The "Call waiting permitted" function
must be activated on your Profiset 70isdn (➔ page 26).
While you are conducting a call, a second incoming call is
signalled acoustically and visually. You can then accept,
reject, ignore, or forward this call without disconnecting
the first caller.
Call waiting is not possible during a conference or consul-
tation call. In this case, the caller is rejected.
<>
and
?
or
Select "Forward call?" and confirm or press the
"Forward call"; LED flashes.
In this case, you must have programmed a key with the
"forward call" features (➔ page 42).
The directory number of the last call forwarding task is
displayed.
The directory number can be deleted by pressing the
backspace key < and re-entered with o .
? Confirm; the LED of the "Forward call" key goes out.
The caller was forwarded to the selected number.
Forward call
<>
and
?
Select "Reject call?" and confirm.
The caller receives a corresponding message from the
switching system.
The directory number, if known, is transferred to the call
list.
To activate the function, press the "Do not disturb" key;
LED lights up.
All calls are then rejected. If the "Info text" function is ac-
tivated (➔ page 25), a predefined info text will appear in
the caller’s display (if available).
To deactivate the function, press the "Do not disturb" key
again. LED goes out.
All calls are then signalled again.
Do not disturb
Do not disturb