Siemens 70isdn - Manual (Page 21)

Putting the system into service
9
kap03.fm5 Profiset 70isdn, GB: A30853-X300-B501-3-7619 20.5.99
Telephone connecting cord
Both ends of the telephone connecting cord have the
same connector.
Insert one connector into the socket labelled D on the
underside of the device and insert the other connector
into your ISDN socket. Feed the cable into the cable run.
In both cases, the connectors must engage audibly.
Step 3: Program the multiple subscriber numbers (MSNs)
If you have connected the Profiset 70isdn correctly, the
following message now appears on the telephone dis-
play:
We recommend that you enter the MSNs when first
putting the telephone into service, because only then can
you use the answering machine functions. The MSNs
(multiple subscriber numbers) are the directory numbers
you were assigned for your ISDN connection. These num-
bers are entered as follows:
MSN missing
Configuration? >
Press the ? key twice.
Enter one of the three MSNs using keys 0 through 9 .
You received the MSNs from the network provider with
your ISDN connection. Do not enter any country or area
codes!
Confirm your entry with ? .
Press ? when finished.
Enter the second MSN. Confirm your entry with ? .
Enter the third MSN. Confirm your entry with ? .
MSN 1
_ Continue with OK
MSN 2
_ Continue with OK
MSN 3
_ Continue with OK
It is not necessary to enter MSNs 2 and 3. If you
do not want to enter these MSNs, skip the
prompt for these numbers by pressing ? with-
out entering any digits.
MSNs can be entered at any time (➔ page 18).