Programming telephone settings, Activating/deactivating the individual meter – Siemens 70isdn User Manual

Page 35

Advertising
background image

Programming telephone settings

23

kap05.fm5

Profiset 70isdn, GB: A30853-X300-B501-3-7619

20.5.99

Activating/deactivating the individual meter

If the individual meter is activated, the accrued charges

are indicated for approx. 3.5 seconds in the telephone dis-

play following each call you make which is liable for charg-

es.

Activating/deactivating the summation meter for charges

If the summation meter is switched on, the sum of all

charges accrued thus far is indicated for approx. 3.5 sec-

onds in the display following each toll call made.

>

Service?

? >

3=local functions?

? >

1=charges?

?

o

and

?

With password protection (➔ page 16): enter the pass-

word.

The upper display line indicates whether the individual

meter is switched on or off.

<>

Select "switch over?".

?

Save the setting. If the individual meter was previously

deactivated, it is now switched on. If it was activated, it

is now switched off.

>

1=charge meter?

?

>

Service?

? >

3=local functions?

? >

1=charges?

?

o

and

?

With password protection (➔ page 16): enter the pass-

word.

The upper display line indicates whether the summation

meter is switched on or off.

<>

Select "switch over?".

?

Save the setting. If the summation meter was previously

deactivated, it is now switched on. If it was activated, it

is now switched off.

>

2=summation meter?

?

There may be differences between the device’s

meter and the individual meter of the switching

centre. The individual meter of the network op-

erator is definitive for the telephone bill.

Advertising