Siemens 70isdn - Manual (Page 36)

Programming telephone settings
24
kap05.fm5 Profiset 70isdn, GB: A30853-X300-B501-3-7619 20.5.99
Clearing the summation meter
The summation meter for charges can be cleared at any
time. The summation meter then restarts at 0.
Activating/deactivating your own directory number display
You must apply to your local network provider for this fea-
ture. Inquire about the respective charges.
You can temporarily suppress the display of your directo-
ry number on another party’s display.
> Service? ? > 3=local functions? ? > 1=charges? ?
o and ? With password protection (➔ page 16): enter the pass-
word.
? Confirm "Clear sum?".
> 2=summation meter? ?
> Service? ? > 2=configuration? ?
o and ? With password protection (➔ page 16): enter the pass-
word.
The upper display line indicates whether or not your own
directory number is displayed.
<> Select "switch over?".
? Save the setting. If your number was previously shown
on the other party’s display, it is now no longer displayed.
If it was not displayed, it is now displayed.
> 04=show own dir. No.? ?
You can also prevent your own directory number
from being displayed by programming an "Anon-
ymous" function key (➔ page 42). When the
"Anonymous" key is activated (LED lights up),
your directory number is not displayed.