Siemens 70isdn - Manual (Page 69)

Convenient and secure telephone communication
57
kap09.fm5 Profiset 70isdn, GB: A30853-X300-B501-3-7619 20.5.99
Parking a call
You can temporarily park a call in order to
● reactivate it at a later stage,
● resume it at another telephone,
● unplug your telephone from one socket and plug it
into another.
The telephone must not be parked for more than three
minutes, as otherwise the call will be disconnected.
Resuming a parked call
You can resume a parked call from your own telephone or
from another telephone.
Prerequisite: a call is parked and you are not conducting a
call.
g You are conducting a call.
<>
and ? Select "Park?" and confirm.
o Enter the connection code, e.g. 1 when prompted to in
the display. The connection code is a number under
which the call can be suspended and later resumed. The
permitted values are 1 to 99 or "none" (no input).
?
and a Confirm and replace the handset.
You can program a "Park/resume" function key
(➔ page 42).
<>
and ?
Select "Resume?" and confirm.
o Enter the assigned connection code if necessary.
c or ? Lift the handset or confirm.
You are reconnected to the parked caller.