Sharp AR-M700N - Manual (Page 65)

FINISHER AND SADDLE STITCH FINISHER
3-9
3
■ ■ ■ ■ Removing a staple jam in the finisher
1 Perform steps 1 to 2 of the procedure for
"Replacing the cartridge in the finisher"
on page 3-7.
2 Holding the knob, lower part (A).
3 Remove any jammed staples.
4 Holding the knob, return part (A) to its
original position.
5 Return the staple case to its original
position.
Insert the cartridge all
the way in until it clicks
into place.
6 Close the front cover of the finisher.
NOTE
Do not touch the stapling area.
The stapler could injure you.
(A)
Stapling area
(A)