Sharp AR-M700N - Manual (Page 58)

3-2
FINISHER AND SADDLE STITCH FINISHER
The finisher and the saddle stitch finisher include the offset function, which offsets each set of copies from the
preceding set for easy separation. Each set of sorted copies can also be stapled. The saddle stitch finisher can
automatically staple a set of copies at the center line and fold the pages to create a pamphlet.
A punch module unit can be installed to add punch holes to copies, and an inserter can be installed to insert blank
pages at specified pages.
In the following explanations, the finisher and saddle stitch finisher are referred to simply as "finisher".
Part names
Specifications
* The illustrations on the following pages (to page 3-18) show the AR-F16; however, the operation of the AR-F15
is the same as the AR-F16.
NOTES
● Do not press on the finisher.
● Use caution when near the offset tray during printing as the tray moves up and down.
Name Finisher (AR-F15) Saddle stitch finisher (AR-F16)
Number of trays 2 3
Paper output Face down output
Paper capacity
Upper paper tray/Middle paper tray:
Non-stapling:
2000 sheets of paper or total aggregate
thickness is within 9-53/64" (250mm):
8-1/2" x 11", 5-1/2" x 8-1/2"R, A4, B5 or A5R
(20 lbs. (80 g/m
2 ))
1000 sheets of paper or total aggregate
thickness is within 5-1/2" (140mm):
Sizes other than the above
Stapling:
100 sets or 750 pages of 8-1/2" x 11", A4
or B5 paper.
100 sets or 500 pages of other sizes of
paper
Upper paper tray/Middle paper tray:
Non-stapling:
2000 sheets of paper or total aggregate thickness
is within 9-53/64" (250mm): 8-1/2" x 11", 5-1/2" x
8-1/2"R, A4, B5 or A5R (20 lbs. (80 g/m
2 ))
1000 sheets of paper or total aggregate thickness is
within 5-1/2" (140mm): Sizes other than the above
Stapling:
100 sets or 750 pages or total aggregate thickness is
within 4-5/16" (110mm) of 8-1/2" x 11", A4 or B5 paper.
100 sets or 500 pages or total aggregate thickness
is within 2-29/32" (74mm) of other sizes of paper
Lower tray:
Stapled print capacity is (11 - 15) sheets x 10 sets, (6
- 10) sheets x 20 sets, (1 - 5) sheets x 25 sets.
Tray
Offset pages and stapled
pages are delivered here.
Stapler compiler
Paper to be stapled is stacked
temporarily.
Top cover
Open for misfeed removal.
Punch module (Option)
Adds punch holes to printed pages.
Front cover
Open to replace the staple
case in the staple unit or clear
jammed staples.
Lower cover
Open to clear misfed paper or
replace the staple cartridge in the
pamphlet unit. (AR-F16 only)
Saddle stitch tray
Saddle stitched output is
delivered here.
(AR-F16 only)
1
2
3
4
5
6
7
Finisher
(AR-F15)
Saddle stitch
finisher (AR-F16)
Finisher (AR-F15)
Saddle stitch finisher
(AR-F16)
(Continued on next page)