Print accumulated vmb data with a password – Kyocera DP-3600 User Manual
Page 104
Chapter 2 Operating the Page Printer
2-36
4.
Display the VMB data you want to print. Pressing the ENTER key will cause Processing to be
displayed and the data will be printed.
Print Accumulated VMB Data with a Password
This function prints VMB data protected by a password which has accumulated in a virtual output tray.
1.
Display >Print VMB data Tray. The VMB tray number will appear in the location marked
by #'s below, while the VMB tray name will appear in the location marked by %'s.
>Print VMB data
Tray###:%%%%%%%
2.
Pressing the ENTER key will cause a ? to flash.
>Print VMB data
Tray###?%%%%%%%
3.
Each time the + or – keys are pressed, the VMB data display will change.
Press the CANCEL key if you want to halt printing. The ? display will disappear.
4.
If a password is set for the VMB data you want to print, the message display will change to
>User ID? 00001 and the printer will standby to accept a password. The cursor will blink in
the one's place of the displayed number. Enter the correct password. Use the 3 and 4 keys to
change places and the + or – keys to change the displayed number. Passwords from 00001 to
65535 can be entered.