Kyocera DP-3600 - Manual (Page 46)

Setup and Connections
1- 25
9. Connect the printer to the computer.
A standard Centronics parallel interface connector ( ) and RS-232C/RS-422A serial interface
connector (IOIOI) are located on the rear side of the printer. For pin connections, please refer to
Appendix C.
Parallel Interface Connector ( )
Serial Interface (RS-232C/RS-422A)
Connector (IOIOI)
CAUTION
Before performing this step, be sure to turn off the printer's power switch
and unplug the power plug from the power outlet. Failure to do so may
result in electric shock.