Kyocera DP-3600 - Manual (Page 112)

Chapter 2 Operating the Page Printer
2-44
Notes_____________________________________________________________________
·
If the name of a macro on the memory card is the same as that in printer memory, the macro data
on the memory card with the conflicting name will not be registered.
·
Registered macro data will be lost if the memory card is pulled out. Re-execute >Read macro if
this happens.
Reading Data (Partitions) from a Memory Card
Specified data (partitions) on a memory card can be read into printer memory.
1. Bring up the menu >Read data on the message display.
This display only appears if there is data on the memory card.
2. Press the ENTER key. ? will flash.
3. You can scroll through data names on the memory card one by one by pressing the + key.
Press the CANCEL key to stop reading data.
4. Press the ENTER key while the desired data name is being displayed. Processing will
appear in the message display and the selected data will be read into the printer.
After data has been read, the message display will return to Ready.