Kyocera DP-3600 - Manual (Page 97)

Reduction (Page Set)
2-29
Reduction (Page Set)
Make settings on the page set menu to print at a reduced size. This menu is used to set the source
paper size and the paper size to use after reduction. These settings can be made from within
programs or files using the PRESCRIBE 2e SPSZ command.
Notes_____________________________________________________________________
·
Printed results when making reductions differ from equivalent size printing. Sometimes the line
width of characters may not be consistent or lines may appear in figures or image patterns.
·
Landscape feeding while making reductions is possible from the multi-purpose tray in first mode.
Bring up the page set menu. The following display will appear.
Source size indicator···This is the paper size before reduction.
This must be the same as the paper size set for print data from the computer.
Target size indicator···This is the paper size after reduction.
This must be the same as the paper size set for the feed cassette.
Target size indicator
Source size indicator
Page set
[CS] ® [CS]